Filter
Top Products
Operator Guide 5-29
Troubleshooting
NOTE: If your printer has frequent jams in this area, you may
need to clean the Q1106 sensor.
Figure 5-19 Area 18
Points to note for clearing jams in area 18:
• Sometimes the display monitor messages direct you to discard
the last sheet delivered to the stack following a jam in area 18.
Check for this message when clearing an area 18 paper jam.
• If your printer has frequent jams in this area, you may need to
clean the Q1107 sensor.
• If your printer has a bypass transport module, you should
check for paper jams in areas 19 and 20 after clearing an area
18 paper jam.
Clearing a paper jam in the bypass transport
1. Open the bypass transport module door.
2. Press the area 19 green lever in the direction of the arrow
printed on it.