4-18 Operator Guide
Maintaining the system
4. Place a dry cleaning pad on the sensor and move it from left to
right to clean the sensor.
5. Lower the area 4 green handle.
6. Close the printer doors.
Cleaning the Q1011 sensor and mirror
Follow this procedure when directed by Xerox Customer Support
Center personnel.
1. Open the right and left doors of the printer and locate the
Q1011 sensor.
Figure 4-18 Q1011 sensor
2. Apply a small amount of lens and mirror cleaner to a cleaning
pad.
3. Wipe the sensor and mirror gently with the cleaning pad.