Xerox 180 EPS Printer User Manual


 
Operator Guide 1-3
Overview
Data formats supported
The Xerox DocuPrint 100/115/135/155/180 EPS can print the
following data formats:
ASCII
LCDS
PCL
PDF
•PostScript
TIFF
IPDS
PPML
The system prints LCDS data from a mainframe host computer,
emulating an IBM 4245 or 3211 page printer. The printing system
can receive data over a channel through bus and tag cables, and
through the Socket Gateway or lpr using TCP/IP protocol.
The system also prints PostScript and PCL data submitted over a
network (Ethernet or AppleTalk) from a variety of clients:
PCs (Windows and Windows NT)
Sun workstations (UNIX)
UNIX command line clients: lp and lp
NetWare Q-Server through a Novell print server (bindery
mode only)
Apple Macintosh workstations
Stock specifications
The success of any print run depends on proper selection, care,
and handling of the paper or other stock that is used. It is very
important to select, store, condition, and load print media properly
in order to keep your printer running at optimum efficiency.