Filter
Top Products
Operator Guide 2-3
Managing the printer
Figure 2-2 Three levers in systems with small paper enablement
NOTE: Use the same pressure setting for all levers.
When the job is complete, return the levers to their normal
positions.
NOTE: Positioning may be affected by machine tolerance, the
paper supplier, or job type (for example, duplex).
Loading paper
Your printer may have up to six feeder trays: two processor trays
(trays 1 and 2) and two to four high-capacity trays (trays 3 through
6). Up to six different stocks may be used within a print job,
including oversized cover stock or tabs.
• You can unlock, pull out, and load any tray from which paper is
not being fed, without interrupting printing.
• If you open a tray that is in use, feeding switches to a backup
tray. If no tray is available, printing stops.
• The printer stops feeding paper from any tray when a ¼-inch/6
mm stack remains in the tray.
1. Unlock the tray that you want to load, using one of the
following methods:
• On the printer: Press the Tray Unlock button on the front
of the tray.
Turn to the right
Turn to the right
Turn to the left