4-10 Operator Guide
Maintaining the system
6. Slide a new, empty, dry ink waste container into the printer
until the container stops.
Figure 4-11 Slide in new waste container
7. Close the printer doors.
NOTE: If any dry ink gets on your hands, wash them with soap
and cold water. Heat sets the ink permanently. If any dry ink
gets on your clothes, brush them with a dry paper towel or a
stiff bristled brush. If this does not remove the ink immediately,
launder with detergent and cold water. Dry cleaners should be
told that the spot is dry ink for a printer, so they do not use a
solvent that sets the stain.