Filter
Top Products
4-4 Operator Guide
Maintaining the system
Using consumables
The following tasks are part of maintaining your system:
• Adding fuser agent
• Replacing the dry ink waste container
• Replacing the dry ink cartridge
• Using the custom transfer assist blade
Adding fuser agent
WARNING: Fuser agent contains silicone, which can cause
irritation upon contact with the eyes. Be sure to wash your hands
with soap and water after you finish this procedure.
To add fuser agent:
1. Open the right and left doors of the printer and locate the fuser
area.
Figure 4-3 The fuser area
2. Place a dropcloth on the floor under the fuser area.
3. Grasp the green handle on the fuser drawer and pull it out until
it stops.