3Com 10014298 Switch User Manual


 
Setting Terminal Parameters 13
Setting Terminal
Parameters
To set terminal parameters:
1 Start the PC and select Start > Programs > Accessories > Communications >
HyperTerminal. The HyperTerminal window displays the Connection Description
dialog box, as shown in
Figure 2.
Figure 2 Set Up the New Connection
2 Enter the name of the new connection in the Name field and click OK. The dialog
box, shown in
Figure 3 displays.
3 Select the serial port to be used from the Connect using dropdown menu.
Figure 3 Properties Dialog Box
4 Click OK. The Port Settings tab, shown in Figure 4, displays and you can set serial
port parameters. Set the following parameters: