Configuring PIM-SM 143
For detailed information of the crp-policy command, see the Switch 7750
Command Reference Guide.
Clearing Multicast Route Entries from PIM Routing Table
Perform the following configuration in user view.
If in this command, the group-address is 224.0.0.0/24 and source-address is the
RP address (where group address can have a mask, but the resulting IP address
must be 224.0.0.0, and source address has no mask), then it means only the (*, *,
RP) item will be cleared.
If in this command, the group-address is any group address, and source-address is
0 (where group address can have a mask, and source address has no mask), then
only the (*, G) item will be cleared.
This command clears multicast route entries from PIM routing table, as well as the
corresponding route entries and forward entries in the multicast core routing table
and MFC.
Clearing PIM Neighbors
Perform the following configuration in user view.
Displaying and Debugging PIM-SM
Execute the display command in all views to display the PIM-SM configuration,
and to verify the configuration.
Restore to the default setting undo crp-policy
Table 155 Clearing Multicast Route Entries from PIM Routing Table
Operation Command
Clear multicast route entries from PIM routing
table
reset pim routing-table { all | {
group-address [ mask group-mask |
mask-length group-mask-length ] |
source-address [ mask source-mask
| mask-length source-mask-length
] | { incoming-interface {
interface-type interface-number |
null } } } * }
Table 156 Clearing PIM Neighbors
Operation Command
Clear PIM neighbors reset pim neighbor { all | {
neighbor-address | interface
interface-type interface-number }
* }
Table 154 Limiting the Range of Legal C-RP
Operation Command