Configuring HWTACACS 233
2.4.4 Configuring HWTACACS Authorization Servers
Perform the following configuration in HWTACACS view.
Table 2-39 Configuring HWTACACS authorization servers
OperationCommand
Configure the primary HWTACACS authorization server.primary authorization
ip-address [ port ]
Delete the primary HWTACACS authorization server.undo primary authorization
Configure the secondary HWTACACS authorization server.secondary
authorization ip-address [ port ]
Delete the secondary HWTACACS authorization server.undo secondary
authorization
The primary and secondary authorization servers cannot use the same IP address.
The default port number is 49.
If you execute this command repeatedly, the new settings will replace the old
settings.
2.4.5 Configuring HWTACACS Accounting Servers and the Related Attributes
I. Configuring HWTACACS accounting servers
Perform the following configuration in HWTACACS view.
Table 2-40 Configuring HWTACACS accounting servers
OperationCommand
Configure the primary TACACS accounting server.primary accounting ip-address [
port ]
Delete the primary TACACS accounting server.undo primary accounting
Configure the secondary TACACS accounting server.secondary accounting
ip-address [ port ]
Delete the secondary TACACS accounting server.undo secondary accounting
The primary and secondary accounting servers cannot use the same IP address.
The default port number is 49.
If you execute this command repeatedly, the new settings will replace the old
settings.
II. Enabling stop-accounting packet retransmission