Filter
Top Products
2
PORT CONFIGURATION
This chapter covers the following topics:
■ Ethernet Port Overview
■ Configuring Link Aggregation
Ethernet Port
Overview
The following features are found in the Ethernet ports of the Switch 7750:
■ 10BASE-T/100BASE-TX Gigabit Ethernet ports support MDI/MDI-X
auto-sensing, and can be configured to operate in half/full duplex mode or
auto-negotiation mode to negotiate the duplex mode and speed with other
network devices. This also allows you to use the optimal mode automatically.
■ 100BASE-FX-MMF Ethernet ports operate in 100 Mbps full duplex mode. The
duplex mode can be configured as full (full duplex) or auto (auto-negotiation).
The speed can be set to 100 (100 Mbps) or auto (auto-negotiation).
■ 1000BASE-X Gigabit Ethernet ports work in gigabit full duplex mode. The
duplex mode can be configured as full (full duplex) or auto (auto-negotiation).
The speed can be set to 1000 (1000Mbps) or auto (auto-negotiation).
■ 10/100/1000BASE-T Gigabit Ethernet ports support MDI/MDI-X auto-sensing,
and the modes are 1000 Mbps full duplex, 100 Mbps half/full duplex, and 10
Mbps half/full duplex. These modules also support auto-negotiation
■ 10GBASE-R-XENPAK 10-Gigabit Ethernet ports work in 10-gigabit full duplex
mode. The duplex mode can be configured as full (full duplex) or auto
(autonegotiation), and the speed can be set to 10000 (10000 Mbps) or auto
(autonegotiation).
Configuring an Ethernet Port Overview is described in the following sections:
■ Configuring Ethernet Ports
■ Example: Configuring the Default VLAN ID of the Trunk Port
■ Troubleshooting VLAN Port Configuration
Configuring Ethernet
Ports
Tasks for configuring Ethernet ports are described in the following sections:
■ Entering Ethernet Port View
■ Enabling and Disabling Ethernet Ports
■ Setting Description Character String for Ethernet Port
■ Setting Duplex Attribute of the Ethernet Port
■ Setting the Speed of the Ethernet Port
■ Setting Cable Type for Ethernet Port