272 CHAPTER 11: SYSTEM MANAGEMENT
Enabling and Disabling Transmission of Trap Information
To enable or disable transmission of trap information, perform the following
configuration in Ethernet port view.
Disabling the SNMP Agent
To disable the SNMP Agent, perform the following configuration in system view.
If a user disables an NMP Agent, it is enabled whatever the snmp-agent command
is configured.
Displaying and Debugging SNMP
Execute the display command to view the SNMP configuration and to verify the
effect of the configuration. Execute the
debugging command in user view to
debug the SNMP configuration.
Table 310 Enable/Disable Transmission of Trap Information
Operation Command
Enable the current port to transmit the trap
information
enable snmp trap updown
Disable the current port from transmitting trap
information
undo enable snmp trap updown
Table 311 Disabling SNMP Agent
Operation Command
Disable snmp agent undo snmp-agent
Table 312 Displaying and Debugging SNMP
Operation Command
Display the statistics information about SNMP
packets
display snmp-agent statisitcs
Display the engine ID of the active device display snmp-agent {
local-engineid | remote-engineid
}
Display the group name, the security mode,
the states for all types of views, and the
storage mode of each group of the switch.
display snmp-agent group
Display the names of all users in the group
user table
display snmp-agent usm-user [ {
local | { engineid engineid } } |
username groupname ]
Display the current community name display snmp-agent community [
read | write ]
Display the current MIB view display snmp-agent mib-view [
exclude | include | viewname
mib-view ]
Display the contact character string of the
system
display snmp-agent sys-info
contact
Display the location character string of the
system
display snmp-agent sys-info
location
Display the version character string of the
system
display snmp-agent sys-info
version