Filter
Top Products
246 CHAPTER 11: SYSTEM MANAGEMENT
Perform the following configuration in all views.
The configuration files are displayed in their corresponding saving formats.
Saving the Current Configuration
Use the save command to retain the current-configuration in the flash memory.
The configurations are saved and used when the system is next powered on.
Perform the following configuration in user view.
Erasing the Configuration Files from Flash Memory
The reset saved-configuration command can be used to erase the
configuration files from flash memory. The system will use the default
configuration parameters for initialization when the switch is powered on the next
time.
Perform the following configuration in user view.
You can erase the configuration files from flash memory in the following cases:
■ If the software does not match the configuration files after the software is
upgraded.
■ If the configuration files in flash are damaged, for example, if the wrong
configuration file has been downloaded.)
FTP FTP is a common way to transmit files on the Internet and IP network. FTP is a
TCP/IP protocol on the application layer and is used for transmitting files between
a remote server and a local host.
The Ethernet switch provides the following FTP services:
■ FTP server — You can run the FTP client program to log in to the server and
access the files on it.
Table 261 Display the Configurations of the Ethernet Switch
Operation Command
Display the saved configuration of the
Ethernet switch
display saved-configuration
Display the current configuration of the
Ethernet switch
display current-configuration [
controller | interface
interface-type [ interface-number
] | configuration [ configuration
] [ | { begin | exclude | include
} regular-expression ]
Table 262 Save the Current-Configuration
Operation Command
Save the current-configuration save
Table 263 Erase the Configuration Files from Flash Memory
Operation Command
Erase the configuration files from the Flash
Memory
reset saved-configuration