Filter
Top Products
Configuring Link Aggregation 49
Perform the following configuration in Ethernet port view.
The default value for port priority is 32768.
Displaying and Debugging Link Aggregation
After you have completed your configuration, execute the display command in
any view to display the link aggregation configuration, and to verify the effect of
the configuration.
You can also use the reset command in user view to clear LACP statistics of the
port. Use the debugging commands in user view to debug LACP.
Table 44 Configure Port Priority
Operation Command
Configure port priority lacp port-priority
port-priority-value
Restore the default port priority undo lacp port-priority
Table 45 Display and Debug Link Aggregation
Operation Command
Display summary information of all
aggregation groups
display link-aggregation summary
Display detailed information of a specific
aggregation group
display link-aggregation verbose
agg-id
Display local system ID display lacp system-id
Display detailed link aggregation information
at the port
display link-aggregation
interface { interface-type
interface-number | interface-name
} [ to { interface-type
interface-num | interface-name }
]
Clear LACP statistics at the port reset lacp statistics [ interface
{ interface-type interface-number
| interface-name } [ to {
interface-type interface-num |
interface-name } ] ]
Disable/enable debugging LACP state machine [ undo ] debugging lacp state [
interface { interface-type
interface-number | interface-name
} [ to { interface-type
interface-num | interface-name }
] ] { { actor-churn | mux |
partner-churn | ptx | rx }* | all
}
Disable/enable debugging LACP packets [ undo ] debugging lacp packet [
interface { interface-type
interface-number | interface-name
} [ to { interface-type
interface-num | interface-name }
] ]
Disable/enable debugging link aggregation
errors
[ undo ] debugging
link-aggregation error
Disable/enable debugging link aggregation
events
[ undo ] debugging
link-aggregation event