Filter
Top Products
30 CHAPTER 1: SYSTEM ACCESS
For all views, use the quit command to return to system view and use the return
command to return to user view.
Table 20 Function Feature of Command View
Command view Function Prompt Command to enter
User view Show basic infor-
mation about
operation and
statistics
<SW7750> Enter immediately
after connecting the
switch
System view Configure system
parameters
[SW7750] Enter system-view
in user view
Ethernet Port view Configure Ethernet
port parameters
[SW7750-Etherne
t1/0/1]
100M Ethernet port
view
Enter interface
ethernet1/0/1 in
system view
[SW7750-Gigabit
Ethernet1/0/1]
Gigabit Ethernet port
view
Enter interface
gigabitethernet
1/0/1 in system view
VLAN view Configure VLAN
parameters
[SW7750-
Vlan1]
Enter vlan 1 in
System view
VLAN interface view Configure IP interface
parameters for a
VLAN or a VLAN
aggregation
[SW7750-Vlan-in
terface1]
Enter interface
vlan-interface
1 in System view
Local-user view Configure local user
parameters
[SW7750-user-
user1]
Enter local-user
user1 in System view
User interface view Configure user
interface parameters
[SW7750-ui0] Enter
user-interface
0 in System view
FTP Client view Configure FTP Client
parameters
[ftp] Enter ftp in user view
PIM view Configure PIM
parameters
[SW7750-PIM] Enter pim in system
view
RIP view Configure RIP
parameters
[SW7750-rip] Enter rip in system
view
Route policy view Configure route policy
parameters
[SW7750-route-
policy]
Enter
route-policy
policy1 permit
node 10 in System
view
Basic ACL view Define the rule of
basic ACL
[SW7750-acl-
basic-2000]
Enter acl number
2000 in System view
Advanced ACL view Define the rule of
advanced ACL
[SW7750-acl-adv
-3000]
Enter acl number
3000 in system view
Layer-2 ACL view Define the rule of
layer-2 ACL
[SW7750-acl-
link-4000]
Enter acl number
4000 in system view
RADIUS scheme view Configure radius
parameters
[SW7750-radius-
1]
Enter radius
scheme 1 in system
view
HWTACACS view Configure
HWTACACS
parameters
[SW7750-hwtacacs-1] Enter hwtacacs
scheme1 in system
view