3Com 10014298 Switch User Manual


 
60 CHAPTER 3: VLAN CONFIGURATION
port hybrid vlan 1 untagged
#
return
2 Configure VLAN 2 and VLAN 3 as protocol VLANs. Set VLAN 2 as IP 10.0.0.1
protocol and VLAN 3 as IP protocol
[SW7750-vlan2]protocol-vlan ?
at Specify AT(AppleTalk Protocol) configuration information
ip Specify IP(Internet Protocol) configuration information
mode Specify other protocol mode configuration information
[SW7750-vlan2]vlan
[SW7750-vlan2]protocol-vlan
[SW7750-vlan2]protocol-vlan ip 10.0.0.1
[SW7750-vlan2]vlan 3
[SW7750-vlan3]protocol-vlan ip
[SW7750-vlan3]dis protocol-vlan vlan all
[SW7750-vlan3]dis protocol-vlan vlan all
VLAN ID: 2
VLAN Type: Protocol-based VLAN
Protocol-Index Protocol-Type
0 ip 10.0.0.1 255.255.255.0
VLAN ID: 3
VLAN Type: Protocol-based VLAN
Protocol-Index Protocol-Type
0 ip
3 Configure the protocol VLAN on port G1/0/1
[SW7750]int g1/0/1
[SW7750-GigabitEthernet1/0/1]port hybrid
[SW7750-GigabitEthernet1/0/1]port hybrid ?
protocol-vlan Specify current hybrid port's protocol-based VLAN
characteristics
pvid Specify current hybrid port's PVID VLAN
characteristics