3Com 10014298 Switch User Manual


 
Configuring HWTACACS 235
Table 2-43 Setting a key for securing the communication with the HWTACACS
server
OperationCommand
Configure a key for securing the communication with the accounting,
authorization or authentication serverkey { accounting | authorization |
authentication } string
Delete the configurationundo key { accounting | authorization | authentication }
No key is configured by default.
2.4.8 Setting the Username Format Acceptable to the TACACS Server
Username is usually in the "userid@isp-name" format, with the domain name
following "@".
If a TACACS server does not accept the username with domain name, you can
remove the domain name and resend it to the TACACS server.
Perform the following configuration in HWTACACS view.
Table 2-44 Setting the username format acceptable to the TACACS server
OperationCommand
Send username with domain name.user-name-format with-domain
Send username without domain name.user-name-format without-domain
By default, each username sent to a TACACS server contains a domain name.
2.4.9 Setting the Unit of Data Flows Destined for the TACACS Server
Perform the following configuration in HWTACACS view.
Table 2-45 Setting the unit of data flows destined for the TACACS server
OperationCommand
Set the unit of data flows destined for the TACACS serverdata-flow-format data {
byte | giga-byte | kilo-byte | mega-byte }
data-flow-format packet { giga-packet | kilo-packet | mega-packet | one-packet }
Restore the default unit of data flows destined for the TACACS serverundo
data-flow-format { data | packet }
The default data flow unit is byte.