3Com 10014298 Switch User Manual


 
RMON 277
Displaying the RMON Configuration
Execute the display command in all views to display the RMON configuration,
and to verify the configuration.
Example: RMON Configuration
Set an entry in the RMON Ethernet statistics table for Ethernet port performance,
which is convenient for network administrators’ query.
Figure 64 RMON Configuration Networking
1 Configure RMON.
[SW7750-Ethernet2/0/1]rmon statistics 1 owner 3com-rmon
2 View the configurations in user view.
<SW7750>display rmon statistics Ethernet2/0/1
Statistics entry 1 owned by 3com-rmon is VALID.
Gathers statistics of interface Ethernet2/0/1. Received:
octets : 270149,packets : 1954
broadcast packets :1570 ,multicast packets:365
undersized packets :0 ,oversized packets:0
fragments packets :0 ,jabbers packets :0
CRC alignment errors:0 ,collisions :0
Table 318 Displaying and Debugging RMON
Operation Command
Display the RMON statistics display rmon statistics [
port-num ]
Display the history information of RMON display rmon history [ port-num ]
Display the alarm information of RMON display rmon alarm [
alarm-table-entry ]
Display the extended alarm information of
RMON
display rmon prialarm [
prialarm-table-entry ]
Display the RMON event display rmon event [
event-table-entry ]
Display the event log of RMON display rmon eventlog [
event-number ]
Console port
Network port
Switch
Internet