Filter
Top Products
GMRP 147
Enable/Disable GMRP Globally
Perform the following configuration in system view.
By default, GMRP is disabled.
Enabling/Disabling GMRP on the Port
Perform the following configuration in Ethernet port view.
GMRP should be enabled globally before being enabled on a port.
By default, GMRP is disabled on the port.
Displaying and Debugging GMRP
After the previous configuration, execute the display command to display the
GMRP configuration, and to verify the effect of the configuration. Execute the
debugging command in user view to debug GMRP configuration.
Example: Configuring GMRP
Implement dynamic registration and an update of multicast information between
switches.
Figure 36 GMRP Networking
Configure LS_A:
1 Enable GMRP globally.
[SW7750]gmrp
Table 158 Enabling/Disabling GMRP Globally
Operation Command
Enable GMRP globally. gmrp
Disable GMRP globally. undo gmrp
Table 159 Enabling/Disabling GMRP on the Port
Operation Command
Enable GMRP on the port gmrp
Disable GMRP on the port undo gmrp
Table 160 Display and Debug GMRP
Operation Command
Display GMRP statistics. display gmrp statistics [
interface interface_list ]
Display GMRP global status. display gmrp status
Enable GMRP debugging debugging gmrp
Disable GMRP debugging undo debugging gmrp event
Switch A Switch B
E0/1
E0/1