3Com 10014298 Switch User Manual


 
Managing Devices 253
Example: Configuring MAC Address Table Management
The user logs in to the switch through the console port to configure the address
table management. Set the address aging time to 500s and add a static address
00e0-fc35-dc71 to Ethernet 1/0/2 in vlan1.
Figure 60 Typical Configuration of Address Table Management
1 Enter the system view of the switch.
<SW7750>system-view
2 Add a MAC address (specify the native VLAN, port and state).
[SW7750]mac-address static 00e0-fc35-dc71 interface Ethernet 1/0/2
vlan 1
3 Set the address aging time to 500s.
[SW7750]mac-address timer 500
4 Display the MAC address configurations in all views.
[SW7750]display mac-address interface Ethernet 1/0/2
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
00-e0-fc-35-dc-71 1 Static Ethernet1/0/2 NOAGED
00-e0-fc-17-a7-d6 1 LearnedEthernet1/0/2 300
00-e0-fc-5e-b1-fb 1 Learned Ethernet1/0/2 300
00-e0-fc-55-f1-16 1 Learned Ethernet1/0/2 300
Managing Devices With device management, the Switch 7750 displays the current state and event
debugging information about the slots and physical devices. In addition, there is a
command for rebooting the system when a function failure occurs.
Enable the address table management
debugging
debugging mac-address
Disable the address table management
debugging
undo debugging mac-address
Table 275 Displaying and Debugging MAC Address Table
Operation Command
Console port
Network port
Internet
Switch