Anritsu Series MS278XB Network Router User Manual


 
Basic Measurement Setups Measurements
5-10 MS278XB OM
Setting the Sweep Time
The Sweep Time sets the duration of a full span sweep. When the sweep time is set to Manual mode, the RBW
and VBW settings need to be set to Auto to allow for their automatic determination.
1. Press the BW icon on the main menu bar, or press the Bandwidth key on the instrument front panel, to
display the Bandwidth menu below:
2. Select Auto Sweep Time mode or press in the Sweep Time parameter field and use the keypad to enter
the desired sweep time, then select the appropriate terminator from the fly-out menu.