![](http://pdfasset.owneriq.net/7/7f/77fb06c2-6f25-4f7a-b257-8e694324d5b5/77fb06c2-6f25-4f7a-b257-8e694324d5b5-bg26.png)
Remote Interface Setup Preparation for Use
2-14 MS278XB OM
This brings up the Measurement and Automation Explorer window, below:
3. On the left hand panel, go to My System | Devices and Interfaces | GPIB0 (PMC-GPIB), right click
on GPIB0, and then select properties from the pop-up menu.
Figure 2-13. National Instruments Measurement and Automation Explorer