Filter
Top Products
Preparation for Use Connecting External Devices
MS278XB OM 2-27
3. Select the location of your network printer and press Find Now, then select your printer from the list and
press OK.
4. Press Finish to complete the Add Printer Wizard.
Connecting an External USB Device
The external USB interface is a standard Type A, USB connector that supports the USB 2.0 standard.
Signature can interface with a variety of external USB devices, such as a keyboard, mouse, printer, scanner,
drive, or camera. The USB interface offers the same behavior that is typically experienced in the Windows
environment. You may connect your USB devices as directed by the manufacturer’s instructions.
Figure 2-34. Add Printer Wizard
Note: A USB mouse may require a hot connection while the instrument is in the Operate mode with the Signature
software running. If a USB mouse fails to operate when the instrument is started with the mouse plugged
into the USB port, reboot the instrument with the mouse disconnected and make the hot connection after
the Signature software is running.