Anritsu Series MS278XB Network Router User Manual


 
Preparation for Storage/Shipment Preparation for Use
2-28 MS278XB OM
2-10 Preparation for Storage/Shipment
Preparation for Storage and Shipment
The following paragraphs give instructions for preparing the MS278XB for storage or shipment.
Preparation for Storage
Preparing the analyzer for storage consists of cleaning the unit, packing the inside of the storage container
with moisture-absorbing desiccant crystals, and storing the unit in a temperature controlled environment that
is maintained between –40°C and +75°C.
Preparation for Shipment
To provide maximum protection against damage in transit, the analyzer should be repackaged in the original
shipping container. If this container is no longer available and the unit is being returned to Anritsu for repair,
advise Anritsu Customer Service; they will send a new shipping container free of charge. In the event neither
of these two options is possible, instructions for packaging and shipment are given below.
Use a Suitable Container
Obtain a corrugated cardboard carton with a 125 kg test strength. This carton should have inside
dimensions of no less than 15 cm larger than the unit dimensions to allow for cushioning.
Protect the Instrument
Surround the unit with polyethylene sheeting to protect the finish.
Cushion the Instrument
Cushion the instrument on all sides by tightly packing dunnage or urethane foam between the carton
and the unit. Provide at least three inches of dunnage on all sides.
Seal the Container
Seal the carton by using either shipping tape or an industrial stapler.
Address the Container
If the instrument is being returned to Anritsu for service, mark the address of the appropriate Anritsu
service center and your return address on the carton in one or more prominent locations.