Filter
Top Products
10-1
SECTION 10. PROCESSING INSTRUCTIONS
To facilitate cross referencing, parameter
descriptions are keyed [ ] to the values given on
the PROMPT SHEET. These values are
defined as follows:
[Z] = Destination input location for result
[X] = Input location of X
[Y] = Input location of Y
[F] = Fixed Data (user specified floating
point number)
*** 30 LOAD FIXED DATA ***
FUNCTION
Store a fixed value into an input location. The
value is entered in scientific notation; the
absolute value of the number may range from 1
x 10
-19
to 9 x 10
18
. A value smaller than the
minimum is set to 0, while a larger value is set
to the maximum.
PARAM. DATA
NUMBER TYPE DESCRIPTION
01: FP Mantissa [F]
02: 2 Exponent of 10 (Hit C
to change sign)
03: 4 Destination for input
location [Z]
Input locations altered: 1
*** 31 COPY INPUT DATA ***
FUNCTION
Copy data from one input location to another.
PARAM. DATA
NUMBER TYPE DESCRIPTION
01: 4 Source input location
number [X]
02: 4 Destination input
location [Z]
Input locations altered: 1
*** 32 INCREMENT INPUT LOCATION ***
FUNCTION
Add 1 to the current value in the specified input
location.
PARAM. DATA
NUMBER TYPE DESCRIPTION
01: 4 Destination input
location [Z]
Input locations altered: 1
*** 33 X + Y ***
FUNCTION
Add X to Y and place result in a third input location.
PARAM. DATA
NUMBER TYPE DESCRIPTION
01: 4 Input location of X [X]
02: 4 Input location of Y [Y]
03: 4 Dest. input location of
X+Y [Z]
Input locations altered: 1
*** 34 X + F ***
FUNCTION
Add F to X (where F is a fixed floating point
number) and place the result in an input location.
PARAM. DATA
NUMBER TYPE DESCRIPTION
01: 4 Input location of X [X]
02: FP Fixed value [F]
03: 4 Dest. input location of
X+F [Z]
Input locations altered: 1
*** 35 X - Y ***
FUNCTION
Subtract Y from X and place the result in an
input location.
PARAM. DATA
NUMBER TYPE DESCRIPTION
01: 4 Input location of X [X]
02: 4 Input location of Y [Y]
03: 4 Dest. input location for
X-Y [Z]
Input locations altered: 1