Open as PDF
Communication Environment Setup
Settings Common to the Network Protocols
● If you want to change the status of an SNMP v. 3 user:
Press [User Settings] ➞ select the user whose status you want to change ➞
press [User On/Off].
● If you want to edit the context:
Press [Context Settings] ➞ edit the context.
If you want to add a context, press [Register] to add a new context. If you want
to change a context, select the context you want to change ➞ press [Edit] to
change the context. If you want to erase a context, select the context you want
to erase ➞ press [Erase].
A context named 'NULL' is registered by default. The 'NULL' context cannot be
deleted, and is not displayed on the Context Settings screen.
On the Network Settings screen, press [Enable Dedicated
Port] ➞ specify the following.
[On]: You can set or browse detailed information on the machine with a Canon
printer driver or utility (UFR II/PCL/PS printer drivers, NetSpot Device Installer,