Filter
Top Products
62-16
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 62 Configuring the ASA IPS Module
Configuring the ASA IPS module
Step 9 Change to each context to configure the IPS security policy as described in “Diverting Traffic to the ASA
IPS module” section on page 62-16.
What to Do Next
Change to each context to configure the IPS security policy as described in “Diverting Traffic to the ASA
IPS module” section on page 62-16.
Diverting Traffic to the ASA IPS module
This section identifies traffic to divert from the ASA to the ASA IPS module.
Prerequisites
In multiple context mode, perform these steps in each context execution space. To change to a context,
in the Configuration > Device List pane, double-click the context name under the active device IP
address.
Detailed Steps
Step 1 Choose Configuration > Firewall > Service Policy Rules.
Step 2 Choose Add > Add Service Policy Rule. The Add Service Policy Rule Wizard - Service Policy dialog
box appears.
Step 3 Complete the Service Policy dialog box, and then the Traffic Classification Criteria dialog box as
desired. See the ASDM online help for more information about these screens.
Step 4 Click Next to show the Add Service Policy Rule Wizard - Rule Actions dialog box.
Step 5 Click the Intrusion Prevention tab.