Filter
Top Products
Contents
xvi
Cisco ASA 5500 Series Configuration Guide using ASDM
CHAPTER
15 Completing Interface Configuration (Transparent Mode, 8.4 and Later) 15-1
Information About Completing Interface Configuration in Transparent Mode (8.4 and Later) 15-1
Bridge Groups in Transparent Mode 15-2
Security Levels 15-2
Licensing Requirements for Completing Interface Configuration in Transparent Mode 15-3
Guidelines and Limitations 15-5
Default Settings 15-6
Completing Interface Configuration in Transparent Mode (8.4 and Later) 15-6
Task Flow for Completing Interface Configuration 15-6
Configuring Bridge Groups 15-7
Configuring General Interface Parameters 15-8
Configuring a Management Interface (ASA 5510 and Higher) 15-11
Configuring the MAC Address and MTU 15-14
Configuring IPv6 Addressing 15-16
Information About IPv6 15-16
Configuring a Global IPv6 Address and Other Options 15-18
(Optional) Configuring the Link-Local Addresses Automatically 15-20
(Optional) Configuring the Link-Local Addresses Manually 15-20
Allowing Same Security Level Communication 15-21
Monitoring Interfaces 15-21
ARP Table 15-22
DHCP 15-22
DHCP Server Table 15-22
DHCP Client Lease Information 15-23
DHCP Statistics 15-24
MAC Address Table 15-25
Dynamic ACLs 15-25
Interface Graphs 15-25
Graph/Table 15-27
PPPoE Client 15-28
Interface Connection 15-28
Track Status for 15-28
Monitoring Statistics for 15-28
Feature History for Interfaces in Transparent Mode 15-29
CHAPTER
16 Completing Interface Configuration (Transparent Mode, 8.3 and Earlier) 16-1
Information About Completing Interface Configuration in Transparent Mode (8.3 and Earlier) 16-1
Information About the Global Management IP Address 16-2