Filter
Top Products
28-13
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 28 Configuring RIP
Feature History for RIP
Step 10 In the Protocol area, choose Connected.
Step 11 In the Metric area, check the Configure Metric Type check box and choose Transparent Mode
(default).
Step 12 In the Optional area, choose a route map from the Route Map drop-down list.
Step 13 Click Manage to configure a specific route map. For more information about configuring route maps,
see the “Adding or Editing a Route Map” section on page 26-4.
Step 14 Click OK.
Feature History for RIP
Table 28-1 lists each feature change and the platform release in which it was implemented. ASDM is
backward-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 28-1 Feature History for RIP
Feature Name Releases Feature Information
RIP support 7.0(1) Support was added for routing data, performing
authentication, and redistributing and monitoring routing
information using the Routing Information Protocol (RIP).
We introduced the following screen: Configuration >
Device Setup > Routing > RIP.