Filter
Top Products
34-45
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 34 Configuring Twice NAT (ASA 8.3 and Later)
Configuration Examples for Twice NAT
c. Choose the new network object by double-clicking it. Click OK to return to the NAT configuration.
Step 17 For the Translated Destination Address, type the name of the Original Destination Address
(TelnetWebServer) or click the browse button to choose it.
Because you do not want to translate the destination address, you need to configure identity NAT for it
by specifying the same address for the Original and Translated destination addresses.
Step 18 Click OK to add the rule to the NAT table.
Step 19 Click Apply.