Filter
Top Products
34-11
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 34 Configuring Twice NAT (ASA 8.3 and Later)
Configuring Twice NAT
Configuring Dynamic PAT (Hide)
This section describes how to configure twice NAT for dynamic PAT (hide). For dynamic PAT using a
PAT pool, see the “Configuring Dynamic NAT or Dynamic PAT Using a PAT Pool” section on page 34-4
instead of using this section. For more information, see the “Dynamic PAT” section on page 32-10.
Detailed Steps
To configure dynamic PAT, perform the following steps:
Step 1 Choose Configuration > Firewall > NAT Rules, and then click Add.
If you want to add this rule to section 3 after the network object rules, then click the down arrow next to
Add, and choose Add NAT Rule After Network Object NAT Rules.
The Add NAT Rule dialog box appears.