Filter
Top Products
69-87
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 69 General VPN Setup
Mapping Certificates to IPsec or SSL VPN Connection Profiles
–
Manage—Opens the Manage Identity Certificates dialog box, on which you can see the
certificates that are already configured, add new certificates, show details for a certificate, and
edit or delete a certificate.
–
Remote Peer Pre-shared Key—Specify the value of the remote peer pre-shared key for the
tunnel group. The maximum length of the pre-shared key is 128 characters.
–
Remote Peer Certificate Authentication—Check Allowed to allow certificate authentication for
IKEv2 connections for this connection profile.
–
Manage—Opens the Manage CA Certificates dialog where you can view certificates and add
new ones.
–
IKE Policy—Specifies one or more encryption algorithms to use for the IKE proposal.
–
Manage—Opens the Configure IKEv1 Proposals dialog box.
–
IPsec Proposal—Specifies one or more encryption algorithms to use for the IPsec IKEv1
proposal.
–
Select—Opens the Select IPsec Proposals (Transform Sets) dialog box, where you can assign a
proposal to the connection profile for IKEv2 connections.
• IKE Keepalive —Enables and configures IKE keepalive monitoring. You can select only one of the
following attributes.
–
Disable Keep Alives—Enables or disables IKE keep alives.
–
Monitor Keep Alives—Enables or disables IKE keep alive monitoring. Selecting this option
makes available the Confidence Interval and Retry Interval fields.
–
Confidence Interval—Specifies the IKE keep alive confidence interval. This is the number of
seconds the ASA should allow a peer to idle before beginning keepalive monitoring. The
minimum is 10 seconds; the maximum is 300 seconds. The default for a remote access group is
10 seconds.
–
Retry Interval—Specifies number of seconds to wait between IKE keep alive retries. The default
is 2 seconds.
–
Head end will never initiate keepalive monitoring—Specifies that the central-site ASA never
initiates keepalive monitoring.
Modes
The following table shows the modes in which this feature is available:
Crypto Map Entry
In this dialog box, specify crypto parameters for the Connection Profile.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——