Filter
Top Products
Contents
xvii
Cisco ASA 5500 Series Configuration Guide using ASDM
Security Levels 16-2
Licensing Requirements for Completing Interface Configuration in Transparent Mode 16-3
Guidelines and Limitations 16-3
Default Settings 16-4
Setting the Management IP Address for a Transparent Firewall (8.3 and Earlier) 16-4
Configuring the IPv4 Address 16-4
Configuring the IPv6 Address 16-5
Information About IPv6 16-5
Configuring the Global Address 16-7
Configuring the Link-Local Addresses Automatically 16-7
Configuring the Link-Local Address on an Interface Manually 16-8
Configuring DAD Settings 16-8
Completing Interface Configuration in Transparent Mode (8.3 and Earlier) 16-9
Task Flow for Completing Interface Configuration 16-9
Configuring General Interface Parameters 16-10
Configuring a Management Interface (ASA 5510 and Higher) 16-11
Configuring General Parameters and the IPv4 Address 16-11
Configuring a Global IPv6 Address and Other Options 16-13
Configuring the MAC Address and MTU 16-15
Allowing Same Security Level Communication 16-17
Monitoring Interfaces 16-17
Feature History for Interfaces in Transparent Mode 16-18
PART
5 Configuring Basic Settings
CHAPTER
17 Configuring Basic Settings 17-1
Configuring the Hostname, Domain Name, and Passwords 17-1
Setting the Hostname, Domain Name, and the enable and Telnet Passwords 17-1
Setting the Date and Time 17-2
Setting the Date and Time Using an NTP Server 17-2
Adding or Editing the NTP Server Configuration 17-3
Setting the Date and Time Manually 17-3
Configuring the Master Passphrase 17-4
Information About the Master Passphrase 17-4
Licensing Requirements for the Master Passphrase 17-5
Guidelines and Limitations 17-5
Adding or Changing the Master Passphrase 17-5
Disabling the Master Passphrase 17-6