Filter
Top Products
B-15
Cisco ASA 5500 Series Configuration Guide using ASDM
Appendix B Configuring an External Server for Authorization and Authentication
Configuring an External LDAP Server
The following URL types are supported.
Note The URLs listed in this table appear in CLI or ASDM menus based on whether or not the
associated plug-in is enabled.
Guidelines for Using Cisco-AV Pairs (ACLs)
• Use Cisco-AV pair entries with the ip:inacl# prefix to enforce access lists for remote IPsec and SSL
VPN Client (SVC) tunnels.
• Use Cisco-AV pair entries with the webvpn:inacl# prefix to enforce access lists for SSL VPN
clientless (browser-mode) tunnels.
• For webtype ACLs, you do not specify the source because the ASA is the source.
Table B-5 lists the tokens for the Cisco-AV-pair attribute:
any All URLs https:// post:// ssh://
cifs:// ica:// rdp:// telnet://
citrix:// imap4:// rdp2:// vnc://
citrixs:// ftp:// smart-tunnel://
http:// pop3:// smtp://
Table B-5 ASA-Supported Tokens
Token Syntax Field Description
ip:inacl#Num= N/A (Identifier) (Where Num is a unique integer.) Starts all AV pair access control lists. Enforces
access lists for remote IPsec and SSL VPN (SVC) tunnels.
webvpn:inacl#Num= N/A (Identifier) (Where Num is a unique integer.) Starts all clientless SSL AV pair access control
lists. Enforces access lists for clientless (browser-mode) tunnels.
deny Action Denies action. (Default)
permit Action Allows action.
icmp Protocol Internet Control Message Protocol (ICMP)
1 Protocol Internet Control Message Protocol (ICMP)
IP Protocol Internet Protocol (IP)
0 Protocol Internet Protocol (IP)
TCP Protocol Transmission Control Protocol (TCP)
6 Protocol Transmission Control Protocol (TCP)
UDP Protocol User Datagram Protocol (UDP)
17 Protocol User Datagram Protocol (UDP)
any Hostname Rule applies to any host.
host Hostname Any alpha-numeric string that denotes a hostname.
log Log When the event occurs, a filter log message appears. (Same as permit and log or
deny and log.)
lt Operator Less than value