Cisco Systems ASA 5580 Network Router User Manual


  Open as PDF
of 2086
 
9-10
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 9 Configuring Trend Micro Content Security
CSC SSM Setup
Step 3 To remove the IP address of a network or host whose ability to connect to the CSC SSM you no longer
want, click Delete.
The Selected Hosts/Networks table lists the IP addresses of networks and hosts whose connection to the
CSC SSM you have added.
What to Do Next
See the “CSC Setup Wizard Password Configuration” section on page 9-10.
CSC Setup Wizard Password Configuration
To change the password required for management access to the CSC SSM, perform the following steps:
Step 1 Choose Configuration > Trend Micro Content Security > CSC Setup > Password.
Step 2 In the Old Password field, enter the current password for management access to the CSC SSM.
Step 3 In the New Password field, enter the new password for management access to the CSC SSM.
Step 4 In the Confirm New Password field, reenter the new password for management access to the CSC SSM.
What to Do Next
See the “CSC Setup Wizard Traffic Selection for CSC Scan” section on page 9-10.
CSC Setup Wizard Traffic Selection for CSC Scan
To display the settings that you have made to select traffic for CSC scanning, perform the following
steps:
Step 1 Choose Configuration > Trend Micro Content Security > CSC Setup > Traffic Selection for CSC
Scan.
The traffic selection for CSC scanning configuration settings that you have entered for the CSC SSM
appear, including the following:
The interface to the CSC SSM that you have chosen from the drop-down list.
The source of network traffic for the CSC SSM to scan.
The destination of network traffic for the CSC SSM to scan.
The source or destination service for the CSC SSM to scan.
Step 2 Do one of the following:
To specify additional traffic details for CSC scanning, click Add. For more information, see
“Specifying Traffic for CSC Scanning” section on page 9-11.
To modify additional traffic details for CSC scanning, click Edit. For more information, see
“Specifying Traffic for CSC Scanning” section on page 9-11.