Filter
Top Products
Contents
l
Cisco ASA 5500 Series Configuration Guide using ASDM
Failover Messages 65-16
Failover System Messages 65-16
Debug Messages 65-16
SNMP 65-17
CHAPTER
66 Configuring Active/Standby Failover 66-1
Information About Active/Standby Failover 66-1
Active/Standby Failover Overview 66-1
Primary/Secondary Status and Active/Standby Status 66-2
Device Initialization and Configuration Synchronization 66-2
Command Replication 66-3
Failover Triggers 66-4
Failover Actions 66-4
Optional Active/Standby Failover Settings 66-5
Licensing Requirements for Active/Standby Failover 66-5
Prerequisites for Active/Standby Failover 66-5
Guidelines and Limitations 66-6
Configuring Active/Standby Failover 66-7
Configuring Failover 66-7
Configuring Interface Standby Addresses 66-9
Configuring Interface Standby Addresses in Routed Firewall Mode 66-9
Configuring the Management Interface Standby Address in Transparent Firewall Mode 66-9
Configuring Optional Active/Standby Failover Settings 66-10
Disabling and Enabling Interface Monitoring 66-10
Configuring Failover Criteria 66-11
Configuring the Unit and Interface Health Poll Times 66-11
Configuring Virtual MAC Addresses 66-12
Controlling Failover 66-13
Forcing Failover 66-13
Disabling Failover 66-13
Restoring a Failed Unit 66-13
Monitoring Active/Standby Failover 66-14
Feature History for Active/Standby Failover 66-14
CHAPTER
67 Configuring Active/Active Failover 67-1
Information About Active/Active Failover 67-1
Active/Active Failover Overview 67-1
Primary/Secondary Status and Active/Standby Status 67-2