Filter
Top Products
39-24
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 39 Configuring the Identity Firewall
Monitoring the Identity Firewall
Step 6 In the Source field, enter any.
Step 7 In the User field, enter none.
Step 8 In the Destination field, enter any.
Step 9 In the Service field, enter an IP service name or number for the destination service, or click the ellipsis
(.) to choose a service.
Step 10 (Optional) In the Description field, enter a description.
Step 11 Click OK. The Add Authentication Rule dialog box closes and the rule appears in the AAA Rules table.
Step 12 Click Apply. The changes are saved to the running configuration.
Monitoring the Identity Firewall
This section contains the following topic:
• Monitoring AD Agents, page 24
• Monitoring Groups, page 24
• Monitoring Memory Usage for the Identity Firewall, page 25
• Monitoring Users for the Identity Firewall, page 25
Monitoring AD Agents
You can monitor the AD Agent component of the Identity Firewall.
Step 1 Open the Monitoring > Properties > Identity > AD Agent.
The Active Directory Agent Information pane appears.
Step 2 Click Refresh to update the data in the pane.
This pane displays the following information about the primary and secondary AD Agents:
• Status of the AD Agents
• Status of the domains
• Statistics for the AD Agents
Monitoring Groups
You can monitor the user groups configured for the Identity Firewall.
Step 1 Open the Monitoring > Properties > Identity > Group.
The Activated Groups pane appears.
Step 2 To display a list of the access rules using the selected group, click Where used.