Filter
Top Products
376 Faxing
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
• Receive Mode
• DRPD Pattern
(This setting is available only when a distinctive ring service is installed
on your telephone line by your telephone company.)
• FAX Header Name
• FAX Number
NOTE: To make initial settings from the printer operator panel, see "Setting
Your Country."
Setting Your Country
1
Press the
(Menu)
button.
2
Press button until
System Setup
is highlighted, and then press the
(Set)
button
.
3
Press button until
Admin Menu
is highlighted, and then press the
(Set)
button.
4
Press button until
Fax Settings
is highlighted, and then press the
(Set)
button.
5
Press button until
Country
is highlighted, and then press the
(Set)
button.
6
Select the country where the printer is used.
The printer must be rebooted after you set the country settings. When a
message prompting you to reboot the printer, select
Yes
. After the reboot,
the top menu is displayed on the operator panel.
NOTE: In case of either one, when you configure the country setting, the
information, which is registered to the device, is initialized.
Setting the Printer ID
In most countries, you are required by law to indicate your fax number on any
fax you send. The printer ID, containing your telephone number and name or
company name, will be printed at the top of each page sent from your printer.
1
Press the
(Menu)
button.