Filter
Top Products
Understanding the Printer Menus 487
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the
printer is turned off and then on again.
Values:
IPv4 Get IP Address Auto IP
*
Sets the IP address automatically. A random
value in the range of 169.254.1.0 to
169.254.254.255 that is not currently in use
on the network is set as the IP address. The
subnet mask is set as 255.255.0.0.
BOOTP Sets the IP address using BOOTP.
RARP Sets the IP address using RARP.
DHCP Sets the IP address using DHCP.
Panel Use this option when you want to set the IP
address manually on the operator panel.
IP Address When an IP address is being set manually, the
IP is allocated to the printer using the format
nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0
to 254. 127 and any value in the range of 224
to 254 cannot be specified for the first octet
of a gateway address.
Subnet Mask When an IP address is being set manually, the
subnet mask is specified using the format
nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0
to 255. 255.255.255.255 cannot be specified
as the subnet mask.
Gateway Address When an IP address is being set manually, the
gateway address is specified using the format
nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0
to 254. 127 and any value in the range of 224
to 254 cannot be specified for the first octet
of a gateway address.
IPsec Disable
*
Disables IPsec.