Filter
Top Products
Faxing 395
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
NOTE: You can cancel the fax job at any time while sending the fax by
pressing the
(Cancel) button.
NOTE: Pressing the
(Start)
button
does not start sending a fax when the
available time is set or the Fax service is locked. (For details, see "Set
Available Time" for the Available time and "Function Enabled" for the Fax
service.)
Confirming Transmissions
When the last page of your document has been sent successfully, the printer
beeps and returns to the standby mode.
If something goes wrong while sending your fax, an error message appears on
the display.
If you receive an error message, press the
(Cancel) button to clear the
message and try to send the document again.
You can set your printer to print a confirmation report automatically after each
fax transmission. For further details, see "Printing a Report."
Automatic Redialing
If the number you have dialed is busy or there is no answer when you send a fax,
the printer will automatically redial the number every minute based on the
number set in the redial settings.
To change the time interval between redials and the number of redial attempts,
see "Available Fax Settings Options."
NOTE: The printer will not automatically redial a number that was busy when the
number was manually entered.
Sending a Delayed Fax
The Delayed Start mode can be used to save scanned documents for
transmission at a specified time to take advantage of lower long distance rates.
1
Load the document(s) facing up with top edge in first into the ADF.
OR
Place a single document facing down on the document glass, and close the
document cover.