Dell 2155CN Printer User Manual


 
Faxing 385
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
Sent Fax Fwd You can set your printer to forward incoming faxes to another
fax number. When a fax arrives at your printer, it is stored in the
memory. Then, the printer dials the fax number that you have
specified and sends the fax.
Select
Off not to forward incoming faxes.
Select
Forward to forward incoming faxes without printing.
If an error occurs during forwarding a received fax, the printer
prints the fax.
Select
Print and Forward to forward and print
incoming faxes.
Fax Fwd Number You enter the fax number of the destination to which incoming
faxes will be forwarded.
Prefix Dial You can specify whether or not to set a prefix dial number.
Prefix Dial Num You can set a prefix dial number of up to five digits. This
number dials before any auto dial number is started. It is useful
for accessing the Private Automatic Branch Exchange (PBX).
Discard Size When receiving a document as long as or longer than the paper
installed in your printer, you can set the printer to discard any
excess at the bottom of the page. If the received page is outside
the margin you set, it will print on two sheets of paper at the
actual size. When the document is within the margin and
Discard Size is set to Auto Reduction, the printer
reduces the document to fit it onto the appropriate sized paper
and discard does not occur. If
Discard Size is set to other
than Auto Reduction, the data within the margin will be
discarded.
ECM You can set whether to enable or disable the ECM (Error
Correction Mode).
Modem Speed You can set the modem speed.
Country You can select the country where the printer is used.
You can change this setting when:
No jobs in operation
No fax jobs waiting in the memory
Fax Activity You can set whether to automatically print a fax activity report
after every 50 incoming and outgoing fax communications.
Option Description