Filter
Top Products
76 Installing Optional Accessories
5
Press button until
Wireless Setup
is highlighted, and then press the
(Set)
button.
6
Press button until
WPS
is highlighted, and then press the
(Set)
button.
7
Press button until
PIN Code
is highlighted, and then press the
(Set)
button.
8
Write down the 8-digit PIN code displayed on the first line of the panel
display or press button until
Print PIN Code
is highlighted, and
then press the
(Set)
button.
The PIN code is printed.
9
Ensure that
Start Configuration
is highlighted, and then press the
(Set)
button.
10
Ensure that the message
Please wait Wireless Setting
is
displayed, and enter the PIN code displayed on the step 7 into the wireless
LAN access point (Registrar).
NOTE: For WPS operation on the wireless LAN access point, refer to the
manual supplied with the wireless LAN access point.
11
When the WPS operation is successful and the printer is rebooted, wireless
LAN connection setting is completed.
WPS-PBC
You can start Push Button Control only from the operator panel.
NOTE: WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a
method to authenticate and register devices required for wireless configuration, by
pressing the button provided on the access point via wireless routers, and then
performing WPS-PBC setting on the operator panel. This setting is available only
when the access point supports WPS.
1
Press the
(Menu)
button.
2
Press button until
System Setup
is highlighted, and then press the
(Set)
button.
3
Press button until
Admin Menu
is highlighted, and then press the
(Set)
button.
4
Press button until
Network
is highlighted, and then press the
(Set)
button.