Filter
Top Products
382 Faxing
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
6
Press or button until the desired setting is highlighted or enter the
value using the numeric keypad, and then press the
(Set)
button.
If necessary, repeat steps 5 and 6.
To return to the top screen of the
(Menu)
menu, press the
(All
Clear)
button.
Available Fax Settings Options
You can use the following settings options for configuring the fax system:
Option Description
Receive Mode You can select the default fax receiving mode.
• Fax: (automatic receive mode)
• Telephone (manual receive mode): Automatic fax reception is
turned off. You can receive a fax by picking up the handset of
the external telephone and then pressing the remote receive
code, or by setting
OnHook
to
On
(you can hear voice or fax
tones from the remote machine) and then pressing the
(Start)
button.
• Telephone/Fax: When the printer receives an incoming fax, the
external telephone rings for the time specified in
Auto Rec
Fax/Tel
, and then the printer automatically receives a fax.
If an incoming call is not a fax, the printer beeps from the
internal speaker indicating that the call is a telephone call.
• Ans Machine/Fax: The printer can share a telephone line with
an answering machine. In this mode, the printer will monitor
the fax signal and pick up the line if there are fax tones. If the
phone communication is using serial transmission in your
country (such as Germany, Sweden, Denmark, Austria,
Belgium, Italy, France and Switzerland), this mode is not
supported.
• DRPD: Before using the Distinctive Ring Pattern Detection
(DRPD) option, distinctive ring service must be installed on
your telephone line by the telephone company. After the
telephone company has provided a separate number for faxing
with a distinctive ring pattern, configure the fax setup to
monitor for that specific ring pattern.