Filter
Top Products
Managing the PowerVault NX3500 141
Removing an NTP Server
If an NTP server is no longer in the LAN or client network, remove the
NTP server.
To remove an NTP server:
1
Select the NTP server you want to remove.
2
Click
Delete NTP server(s)
.
3
Click
Save Changes
.
Synchronizing PowerVault NX3500 With a Local NTP Server
Network Time Protocol (NTP) helps in synchronizing and coordinating time
distribution. The NTP server helps in synchronizing the clocks over the network.
If the system is not part of a Windows network, configure it to synchronize
with a local NTP server (if such a server exists), or with an NTP server on the
Internet. However if the system is part of a windows network, the AD can
serve as the NTP server.
To configure the PowerVault NX3500 system to be synchronized with a local
NTP server or an NTP server on the Internet:
1
Click
System Management
General
Time Configuration
.
2
Select
Time should be synchronized with an NTP server.
3
Select
NTP Server.
4
Type the name of the local NTP server or Internet NTP server in the
NTP
server
field.
5
If you want to add a redundant NTP server, click
Add NTP Server
and type
the name of the redundant NTP server in the
NTP server
field.
6
Click
Save Changes
.