Filter
Top Products
60 Setting Up Your PowerVault NX3500 Solution
NOTE: The MD storage array best practices recommend different subnets to
be configured on each port of the MD controllers. For MD device such as the
MD3200i with four ethernet ports per controller, the NAS cluster establishes
iSCSI connections on two of the ports. The other two ports can be used to
provision block storage to other iSCSI clients.
The
Configuration Summary
window is displayed.
All settings are applied to your controllers after this point. Listed below is a
checklist of items to review:
• Ensure no duplicate IP addresses are present
• Check that IP groups are in the same subnet as required
• NAS cluster name follows expected naming convention
• SAN MTU setting matches MTU configuration of the switch
connecting the NAS controllers to the backend MD3
x
x0i storage
device
12
Click
Next
on the
Configuration Summary
window.