Filter
Top Products
48 Setting Up Your PowerVault NX3500 Solution
If you have selected
Manual
configuration, proceed to step 10.
10
In the
Manual Physical Disk Selection
window, select the appropriate
RAID level in
Select RAID Level
.
You can select RAID levels 0, 1/10, 6, and 5. Depending on the RAID level
chosen, the physical disks available for the selected RAID level is displayed
in
Unselected Physical Disks
table.
11
In the
Unselected Physical Disks
table, select the appropriate physical
disks and click
Add
.
NOTE: You can select multiple physical disks at the same time by holding
<Ctrl> or <Shift> and selecting additional physical disks.
To view the capacity of the new disk group, click
Calculate Capacity
.
12
Click
Finish
.
Repeat the procedure for a minimum of two disk groups.