Filter
Top Products
Setting Up Your PowerVault NX3500 Solution 55
To change the user to
root
:
a
At the prompt, type
su
and enter the root password at the prompt.
b
Navigate to the root home folder by typing
cd ~/
.
c
Execute the
PowerVault NASCU
by typing
/bin/sh./Dell-PV-NAS-
Config-Utility
.
The welcome screen is displayed.
The actual configuration is deferred until all settings are confirmed in the
Configuration Summary
screen.
CAUTION: Use this utility only to configure two unconfigured controllers. Do not
attempt to use this utility on fully configured or clustered PowerVault NX3500 or to
reconfigure IP addresses. This utility does not check for duplicate IPs or null entries.
The
Storage Array Identification and Configuration
window is displayed.
3
Type in the
MD Discovery IP
address, the
Subnet Mask,
and the MTU size.
4
Click
Next.