Filter
Top Products
Setting Up Your PowerVault NX3500 Solution 59
10
Type in the required parameters in the
Internal Network Configuration
window and click
Next.
Internal IPs
: These are used for internal communication between the
controller pair. IP addresses specified must be grouped in two different
subnets and be completely isolated from any other system on the network.
The PowerVault NASCU requests for these IP addresses to ensure that
there are no IP address clashes with other systems on your network.
The
SAN Network Configuration
window is displayed.
11
Type in the required parameters and click
Next
.
SAN IPs
: These are used for iSCSI communication with the backend
storage device (PowerVault MD3
xx
0i). As a result, these IPs must be on the
same subnets configured on the MD3
xx
0i storage array. iSCSI sessions are
established with the MD3
xx
0i storage array over the two subnets specified.