Filter
Top Products
Closing the case
www.emachines.com
147
Closing the case
Replacing the front bezel
To replace the front bezel:
1 If you disconnected the bezel cables when you removed the bezel,
reconnect them to the system board.
2 Align the latch pins on the bezel with the computer latch holes.
3 Press the bezel firmly into place.
Replacing the side panel
To replace the side panel:
1 Make sure that all of the internal cables are arranged inside the case so
they will not be pinched when you close the case.
2 Align the side panel, then slide the side panel toward the front of the
computer to secure it into place.
3 Replace the side panel thumbscrews.
4 Reconnect the cables and power cord.