Filter
Top Products
Installing Summit Family Switches
Summit Family Switches Hardware Installation Guide
128
● Sides: For a two-post rack installation, allow adequate space for access to the sides of the switch so
that the front mounting brackets can be attached to the switch.
Selecting Rear Mounting Brackets
The Summit X480 series switch has two sets of rear mounting brackets. Use the bracket that best suits
the type of rack installation:
● Shorter brackets—mid-mounting in a 2-post rack
● Longer brackets—mounting in a 4-post rack
Mid-Mounting the Switch in a Two-Post Rack
Use the shorter rear mounting brackets for a mid-mounted switch.
To mid-mount the switch in a two-post rack:
1 Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate
ground point on the rack.
2 Using rack-mounting screws suitable for your rack, attach a rear mounting bracket to the back of
each rack post (Figure 97).
Do not tighten the screws all the way. You should be able to move the brackets against the rack post.
Figure 97: Attaching a Rear Mounting Bracket
SH_125