Filter
Top Products
Summit Family Switches
Summit Family Switches Hardware Installation Guide
56
Summit X450e-48p Switch
The front panel of the Summit X450e-48p switch (Figure 45) includes:
● Forty-four fixed autosensing 10/100/1000 BASE-T PoE ports (ports 1-44) that provide high-density
copper connectivity and a full 15.4 Watts of PoE per port when used with the EPS-C/EPS-600LS
● Four combination ports (ports 45-48) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
or fiber connectivity
For more information about combination ports, see “Combination Ports and Failover” on page 16.
For information about SFPs, see the Extre me Ne two rks Plugg a ble Inte rfa c e Mo dule s Ins ta lla tio n G uide .
NOTE
All 48 ports can provide PoE power
● LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see “Summit X450, X450a, and X450e Series
Switch LEDs” on page 58.
● Stack number indicator showing the position of this switch in a stacked configuration.
● Serial console port used to connect a terminal and perform local management.
Figure 45: Summit X450e-48p Switch Front Panel
The rear panel of the Summit X450e-48p switch (Figure 46) includes:
● Slot for one of the following Summit option cards:
■ Summit XGM2-2xn option card, which allows you to add up to two 10-gigabit XENPAK modules
■ Summit XGM2-2xf option card, which allows you to add up to two 10-gigabit XFP modules
For information about these Summit option cards, see “Summit XGM2-2xn Option Card” on
page 197 or “Summit XGM2-2xf Option Card” on page 198.
● Management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for optional connection to the EPS-C chassis (Model No. 10912).
This chassis can hold up to three EPS-600LS External Power Modules (Model No. 10913). The
connecting redundant power supply cable is shipped with the EPS-C chassis.
The PoE capability of the Summit X450e-48p switch varies depending on the number of external
power modules in use. For more information, see “Summit X450e-48p Power Supplies” on page 57
and “EPS-600LS External Power Module” on page 77.
● AC power input socket
The power supply operates from 100 VAC to 240 VAC.
STACK NO.
Stack
10G
MGMT
FAN
PSU-1
PSU-E
Solid ON = Link
Blinking = Activity
2
1
1
2
1
2
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
20
19
22
21
24
23
26
25
28
27
30
29
32
31
34
33
36
35
38
37
40
39
42
41
4443 4645 48
47
46X
45X
48X
47X
Shared Ports
SH 030B
Combination ports
Console
port
10/100/1000 Mbps ports
Stack number
indicator